Setup HG633 router not working Setup HG633 router not wo...

Topic: Setup HG633 router not working

Post Setup HG633 router not working
by RebelSparky on Sunday, February 3, 2019

Hi, Just joined you guys. I have tried to setup my router to enable remote access to my home camera(watch-bot) via my router HG633 with TalkTalk(supplier of broadband UK).
I have incuded a screen shot of my router DDNS settings. Can you tell me if I have made any errors? I have tried rebooting router to change WAN IP address from :92.22.82.28 to :80.42.69.199, to see if the settings worked by looking at your website under my account, but IP4 address is unchanged??
Hope you can help me.

Peter Barnes

Reply with quote | Report
Post Re: Setup HG633 router not working
by nwvyc on Saturday, March 14, 2020

RebelSparky wrote:Hi, Just joined you guys. I have tried to setup my router to enable remote access to my home camera(watch-bot) via my router HG633 with TalkTalk(supplier of broadband UK).
I have incuded a screen shot of my router DDNS settings. Can you tell me if I have made any errors? I have tried rebooting router to change WAN IP address from :92.22.82.28 to :80.42.69.199, to see if the settings worked by looking at your website under my account, but IP4 address is unchanged??
Hope you can help me.

Peter Barnes
I've had the same problem. Tried those settings you've got there (changing details as necessary for out account), and miraculously, at one point, the message did change to "Synchronized".

Following this, I found I could no longer access the webcam connected to the router using the dynu.net URL we have. So, I waited a little while, checked the IP address we were set to - it was still correct - and connection to the webcam came back online again. I then went into the settings again, and noticed the message had changed to "Failed to synchronize". So, I don't know what to think. I didn't try restarting the router to see if it really would synchronize when necessary.

Reply with quote | Report
Post Re: Setup HG633 router not working
by vesey on Sunday, March 15, 2020

Reply with quote | Report
Thursday, March 28, 2024 10:53 AM
Loading...