can't connect can't connect

Topic: can't connect

Post can't connect
by James Jacobs on 2017年8月16日

Using a raspberry pi 3, ddclient, and a 3g gsm dongle (carrier:Telcel), I cannot connect from my remote computer to my domain windsong.mywire.org (200.68.136.176) either to the running node red server (200.68.136.176:1880) nor successfully ping the domain windsong.mywire.org. However, my raspberry pi successfully updates the its IP4v address to the 3g internet address on the Dynu control panel and, for example, can successfully ping Google.com on its PPP0 interface.

What am I doing wrong?

Jim

Reply with quote | Report
Post Re: can't connect
by lucafesta on 2017年8月16日

James Jacobs wrote:Using a raspberry pi 3, ddclient, and a 3g gsm dongle (carrier:Telcel), I cannot connect from my remote computer to my domain windsong.mywire.org (200.68.136.176) either to the running node red server (200.68.136.176:1880) nor successfully ping the domain windsong.mywire.org. However, my raspberry pi successfully updates the its IP4v address to the 3g internet address on the Dynu control panel and, for example, can successfully ping Google.com on its PPP0 interface.

What am I doing wrong?

Jim
Did you do any port forwarding?

Reply with quote | Report
Post Re: can't connect
by jdjacobs2 on 2017年8月17日

Think I discovered the problem As I stated I am using a 3g dongle to a gsm network. Apparently, based upon my internet research, most or all carriers block all incoming traffic and thus a ddns solution will not work.

Reply with quote | Report
2025年11月3日 17:09
Loading...