Linux based ddns client s...
                
  Linux based ddns client setup
                - Casa
 - Pannello di controllo
 - Forum della Comunità
 - Services
 - Dynamic DNS Service
 - Linux based ddns client setup
 
- Forum della Comunità
 - Linux based ddns client setup
 
Argomento: Linux based ddns client setup
                                Dear, I have been using windows 10 based ddclient and it was working well. Now I moved to Raspberry Pi based linux and installed ddclient. Config file seems correct. But the IP is not changing. It shows old IP which was part of windows based internet connection. Any help is appreciated.Thanks in advance
                                
                            
                            
                            
                        Rispondi con citazione | Segnalare
                                Could you please make sure that the Windows IP update client is not running? Please make sure that it is not running as Windows Service either.You can use ddclient -daemon=0 -debug -verbose -noquiet to enable debug and verbose messages.
                                
                            
                            
                            
                        Rispondi con citazione | Segnalare
                                Dear, I removed the client in win10 systems and rebooted . Also did your steps on RPi and got the same ip as if win10 based client update. Response follows."WARNING:  file /var/cache/ddclient/ddclient.cache, line 3: Invalid Value for keyword 'ip' = ''RECEIVE:  <html><head><title>Current IP Check</title></head><body>Current IP Address: 157.51.99.144</body></html>DEBUG:    get_ip: using web, checkip.dyndns.com reports 157.51.99.144WARNING:  skipping update of chennai.dynu.net from <nothing> to 157.51.99.144.WARNING:   last updated <never> but last attempt on Sat May  6 02:34:22 2017 failed.WARNING:   Wait at least 5 minutes between update attempts.pi@raspberrypi ~ $
                                
                            
                            
                            
                        Rispondi con citazione | Segnalare
Nadi wrote:Dear, I removed the client in win10 systems and rebooted . Also did your steps on RPi and got the same ip as if win10 based client update. Response follows."WARNING: file /var/cache/ddclient/ddclient.cache, line 3: Invalid Value for keyword 'ip' = ''RECEIVE: <html><head><title>Current IP Check</title></head><body>Current IP Address: 157.51.99.144</body></html>DEBUG: get_ip: using web, checkip.dyndns.com reports 157.51.99.144WARNING: skipping update of chennai.dynu.net from <nothing> to 157.51.99.144.WARNING: last updated <never> but last attempt on Sat May 6 02:34:22 2017 failed.WARNING: Wait at least 5 minutes between update attempts.pi@raspberrypi ~ $
Rispondi con citazione | Segnalare
| Autore | Argomento: Linux based ddns client setup | 
|---|---|
| 
                                Natarajan Kumarasamy Iscritto: 27/09/2016  | 
                            
                                
                                 venerdì 5 maggio 2017 03:24 
                                    Dear, I have been using windows 10 based ddclient and it was working well. Now I moved to Raspberry Pi based linux and installed ddclient. Config file seems correct. But the IP is not changing. It shows old IP which was part of windows based internet connection. Any help is appreciated.Thanks in advance
                                    
                                 
                                
                                
                                
                             | 
                        
| 
                                timothytw Iscritto: 02/05/2002  | 
                            
                                
                                 venerdì 5 maggio 2017 10:32 
                                    Could you please make sure that the Windows IP update client is not running? Please make sure that it is not running as Windows Service either.You can use ddclient -daemon=0 -debug -verbose -noquiet to enable debug and verbose messages.
                                    
                                 
                                
                                
                                
                             | 
                        
| 
                                Nadi Iscritto: 27/09/2016  | 
                            
                                
                                 venerdì 5 maggio 2017 14:05 
                                    Dear, I removed the client in win10 systems and rebooted . Also did your steps on RPi and got the same ip as if win10 based client update. Response follows."WARNING:  file /var/cache/ddclient/ddclient.cache, line 3: Invalid Value for keyword 'ip' = ''RECEIVE:  <html><head><title>Current IP Check</title></head><body>Current IP Address: 157.51.99.144</body></html>DEBUG:    get_ip: using web, checkip.dyndns.com reports 157.51.99.144WARNING:  skipping update of chennai.dynu.net from <nothing> to 157.51.99.144.WARNING:   last updated <never> but last attempt on Sat May  6 02:34:22 2017 failed.WARNING:   Wait at least 5 minutes between update attempts.pi@raspberrypi ~ $
                                    
                                 
                                
                                
                                
                             | 
                        
| 
                                timothytw Iscritto: 02/05/2002  | 
                            
                                
                                 domenica 7 maggio 2017 11:39 
  | 
                        
            lunedì 3 novembre 2025 16:39
        
    