trying to get custom ddns...

trying to get custom ddns to work on a QNAP NAS

Argomento: trying to get custom ddns to work on a QNAP NAS

trying to get custom ddns to work on a QNAP NAS
di nibbles su martedì 23 ottobre 2018

Hello,

Based on the similarities suggested for Synology NAS, I've tried to setup a customized DDNS entry for your service however, So far, I've not been able to get it to work.

I've attached screenshot example for the configuration for the customized setup (with credentials removed for confidentiality)

I am only getting message notification that the update failed

Do you have recommendations on settings based on information which I followed from your reference in Synology NAS which is very much similar device.

https://www.dynu.com/DynamicDNS/IPUpdateClient/SynologyNAS

Thanks
Jean Guy

Rispondi con citazione | Segnalare

Re: trying to get custom ddns to work on a QNAP NAS
di AbramR su domenica 6 gennaio 2019

Did you get any help for this issue, I am dealing with the same issues..

Rispondi con citazione | Segnalare

Re: trying to get custom ddns to work on a QNAP NAS
di timothytw su mercoledì 16 gennaio 2019

The QNAP config can be found at this QNAP DDNS page.

Rispondi con citazione | Segnalare

Re: Re: trying to get custom ddns to work on a QNAP NAS
di miffa su mercoledì 30 ottobre 2019

timothytw wrote:The QNAP config can be found at this QNAP DDNS page.

I've added this config to my QNAP (QTS 4.4.1.1081 build 20191005) but it doesn't work. It just shows a purple dot on the left side and shows no IP.

Any idea?

Rispondi con citazione | Segnalare

Re: Re: Re: trying to get custom ddns to work on a QNAP NAS
di kirmy su domenica 4 ottobre 2020

miffa wrote:
timothytw wrote:The QNAP config can be found at this QNAP DDNS page.
I've added this config to my QNAP (QTS 4.4.1.1081 build 20191005) but it doesn't work. It just shows a purple dot on the left side and shows no IP.

Any idea?

mine is the same? burgundy light, and not connecting

Rispondi con citazione | Segnalare

Re: trying to get custom ddns to work on a QNAP NAS
di eoliveira su martedì 13 ottobre 2020

I'm having the same problem.

Already posted a Ticket with Qnap. We're in the discussion part.
As soon as I get a valid reply I'll post it here

Rispondi con citazione | Segnalare

Re: trying to get custom ddns to work on a QNAP NAS
di eoliveira su giovedì 15 ottobre 2020

Hi everyone,

After talking with their support we found out that its necessary to port forward port 8080 to the Qnap NAS or the web comunication port that you have setup in the NAS settings.

Its actually strange that it's necessary to port forward when the communication is from within our local network to the outside. I've questioned them about this.

Nevertheless it works like this. I'm considering changing the default port just for safety.

Hope it works for you.

Rispondi con citazione | Segnalare

Re: Re: trying to get custom ddns to work on a QNAP NAS
di painkillers su martedì 10 novembre 2020

eoliveira wrote:Hi everyone,

After talking with their support we found out that its necessary to port forward port 8080 to the Qnap NAS or the web comunication port that you have setup in the NAS settings.

Its actually strange that it's necessary to port forward when the communication is from within our local network to the outside. I've questioned them about this.

Nevertheless it works like this. I'm considering changing the default port just for safety.

Hope it works for you.

Hi there,

My Qnap is not using the default 8080 port, then how should I set it up? For example, my QNAP uses 12345 for the web communication port. My NAT rule should be external port 8080, internal port 12345 and protocol is TCP. But the DDNS service still shows purple instead of green. Did I do it wrong? Thank you.

Rispondi con citazione | Segnalare

Autore	Argomento: trying to get custom ddns to work on a QNAP NAS
nibbles Iscritto: 22/10/2018	trying to get custom ddns to work on a QNAP NAS martedì 23 ottobre 2018 21:04 Hello, Based on the similarities suggested for Synology NAS, I've tried to setup a customized DDNS entry for your service however, So far, I've not been able to get it to work. I've attached screenshot example for the configuration for the customized setup (with credentials removed for confidentiality) I am only getting message notification that the update failed Do you have recommendations on settings based on information which I followed from your reference in Synology NAS which is very much similar device. https://www.dynu.com/DynamicDNS/IPUpdateClient/SynologyNAS Thanks Jean Guy Top Rispondi con citazione Segnalare
AbramR Iscritto: 01/01/2019	trying to get custom ddns to work on a QNAP NAS domenica 6 gennaio 2019 15:50 Did you get any help for this issue, I am dealing with the same issues.. Top Rispondi con citazione Segnalare
timothytw Iscritto: 02/05/2002	trying to get custom ddns to work on a QNAP NAS mercoledì 16 gennaio 2019 10:36 The QNAP config can be found at this QNAP DDNS page. Top Rispondi con citazione Segnalare
miffa Iscritto: 06/10/2018	trying to get custom ddns to work on a QNAP NAS mercoledì 30 ottobre 2019 07:10 timothytw wrote:The QNAP config can be found at this QNAP DDNS page. I've added this config to my QNAP (QTS 4.4.1.1081 build 20191005) but it doesn't work. It just shows a purple dot on the left side and shows no IP. Any idea? Top Rispondi con citazione Segnalare
kirmy Iscritto: 04/10/2020	trying to get custom ddns to work on a QNAP NAS domenica 4 ottobre 2020 05:13 miffa wrote: timothytw wrote:The QNAP config can be found at this QNAP DDNS page. I've added this config to my QNAP (QTS 4.4.1.1081 build 20191005) but it doesn't work. It just shows a purple dot on the left side and shows no IP. Any idea? mine is the same? burgundy light, and not connecting Top Rispondi con citazione Segnalare
eoliveira Iscritto: 16/06/2017	trying to get custom ddns to work on a QNAP NAS martedì 13 ottobre 2020 10:31 I'm having the same problem. Already posted a Ticket with Qnap. We're in the discussion part. As soon as I get a valid reply I'll post it here Top Rispondi con citazione Segnalare
eoliveira Iscritto: 16/06/2017	trying to get custom ddns to work on a QNAP NAS giovedì 15 ottobre 2020 15:43 Hi everyone, After talking with their support we found out that its necessary to port forward port 8080 to the Qnap NAS or the web comunication port that you have setup in the NAS settings. Its actually strange that it's necessary to port forward when the communication is from within our local network to the outside. I've questioned them about this. Nevertheless it works like this. I'm considering changing the default port just for safety. Hope it works for you. Top Rispondi con citazione Segnalare
painkillers Iscritto: 17/08/2019	trying to get custom ddns to work on a QNAP NAS martedì 10 novembre 2020 21:48 eoliveira wrote:Hi everyone, After talking with their support we found out that its necessary to port forward port 8080 to the Qnap NAS or the web comunication port that you have setup in the NAS settings. Its actually strange that it's necessary to port forward when the communication is from within our local network to the outside. I've questioned them about this. Nevertheless it works like this. I'm considering changing the default port just for safety. Hope it works for you. Hi there, My Qnap is not using the default 8080 port, then how should I set it up? For example, my QNAP uses 12345 for the web communication port. My NAT rule should be external port 8080, internal port 12345 and protocol is TCP. But the DDNS service still shows purple instead of green. Did I do it wrong? Thank you. Top Rispondi con citazione Segnalare

Al momento è mercoledì 12 marzo 2025 01:54 US Mountain Standard Time

mercoledì 12 marzo 2025 01:54

Loading...